← All Industries
Houses of Worship

Every seat sees the message

Bright, seamless indoor LED that replaces washed-out projection for good — lyrics, IMAG, and scenic content that hold up under stage lighting, with fine pitch for the front rows.

Houses of Worship LED video wall

Projection made sense when sanctuaries were dark. Modern worship lighting changed that — a projector fighting stage wash loses, every Sunday, while LED holds full color and contrast with the lights up. The practical difference shows in the back row reading lyrics and the front row seeing a clean image instead of a gray screen, and LED never needs a bulb swap or a lens alignment again.

The spec conversation is really about your room: pitch set by the distance to your closest seats, brightness tuned so the wall serves the service instead of overpowering it, and a control setup simple enough for a volunteer tech team to run confidently. Budget-conscious builds often start with a rental-grade wall that delivers 90% of the result — we'll show you both paths and price them honestly.

Where it goes
  • Main sanctuary IMAG
  • Scenic / stage backdrop
  • Lobby & wayfinding
  • Overflow & multi-site
Spec guide
Typical pitchP1.95 – P3.9, set by front-row distance
Brightness1,000 – 1,500 nits, room-tuned
OperationVolunteer-friendly control, front service
Recommended seriesRS Series · SV2 Series

// Common questions

Houses of Worship: asked & answered

Is LED really better than a projector for a sanctuary?

Under stage lighting, decisively — LED holds contrast and color with the room lit, while projection needs darkness to compete. Over 5–7 years, no bulbs and no filter maintenance also narrows the cost gap.

What pitch should a church LED wall be?

Measure to your closest regular seat. Front rows at 10–13 feet → P1.95; 15–20 feet → P2.5–P2.6; a scenic backdrop behind the band can run P3.9 and nobody will know.

Can our volunteers run it?

Yes. Day-to-day it's a video input like any display — ProPresenter or your existing switcher feeds it directly. We commission the system, set the presets, and train your team on install week.

Ready to spec it?

Tell us the room, the crowd, and the goal — we'll match the pitch, brightness, and build, then quote it fast.