"How much is an LED wall?" is the first question everyone asks and the hardest to answer in one number, because an LED wall is priced by the square foot, and that rate swings with pixel pitch, brightness, environment, and how complex the system behind it is. Here's how to think about it.
The biggest cost driver: pixel pitch
Finer pitch packs in more LEDs, so it costs more per square foot. These are starting ranges for a full-scope installed wall: panels, processing, mounting, and commissioning by our crew. Every project is finalized after a site walk.
| Pitch Tier | Typical Use | Installed, starting / sq ft |
|---|---|---|
| Sub-1 mm COB indoor (≤P1.0) | Broadcast, executive boardrooms | $1,100 to $1,600 |
| Ultra fine-pitch COB indoor (≤P1.6) | Lobbies, boardrooms, control rooms | $750 to $1,000 |
| Fine-pitch indoor (≤P1.95) | Corporate, retail, houses of worship | $450 to $650 |
| Standard indoor (≤P2.6) | Retail, corporate, indoor stage | $300 to $450 |
| Indoor stage / large indoor (≤P4) | Concerts, venues, sanctuaries | $225 to $350 |
| Large-format indoor (P4+) | Arenas, atriums | $165 to $275 |
| Outdoor fixed install (≤P4) | Storefronts, plazas, DOOH | $480 to $750 |
| Large-format outdoor (P4+) | Billboards, stadiums | $300 to $480 |
Starting points, not a quote. The low end of each band is where a straightforward single wall starts. Finer pitch, redundant or broadcast-grade processing, curves and corners, multiple surfaces, and multi-wall systems move the number up the band and sometimes past it. A site walk settles the real figure.
Skip the math. Our LED Wall Calculator turns your dimensions and viewing distance into a recommended pitch, panel count, resolution, power, and a starting investment estimate, in about 60 seconds.
What moves the number
A few decisions carry most of the swing between the bottom and the top of a band:
- Processing tier: a single processor for one wall versus redundant or broadcast-grade processing with multiple inputs.
- Geometry: a flat rectangle versus curves, corners, columns, or several surfaces that have to read as one canvas.
- Number of walls: every additional surface adds processing, cabling, and commissioning time.
- Structure: wall mounts, ground stacks, or hanging frames, with structural work staying with a licensed contractor.
- Spares and freight: extra modules and a power supply for fast fixes, plus shipping to the site. Both are quoted per project.
- Content: often the difference between "a screen" and "a moment."
Own it for years, not months
The best LED lasts 100,000+ hours. Factor in warranty and local service when you compare quotes: a slightly higher price with US-based support and spares almost always wins on total cost of ownership. For revenue-generating DOOH, many walls pay for themselves in ad sales; ask us to run the ROI with you.
Want your real number? Send us your project and a production pro comes back with a full spec and price — usually the same day.